ModelWI-AP315Hardware SpecificationsWireless Standards802.11ac wave1802.11n/b/g/aOperating Bands2.4GHz & 5GHzAntenna2.4Ghz:5dBi, 5GHz: 5dBiSpatial Steams2.4GHz: 2x2 MIMO 5GHz: 1x1 MIMOSignal RateUp to 300Mbps at 2.4GUp to 450Mbps at 5GReceiver Sensitivity2.4GHz802.11n: -70dBm@MCS7 -88dBm@MCS0802.11g: -72dBm@54Mbps -90dBm@6Mbps 802.11b: -85dBm@11Mbps -94dBm@1Mbps5GHz802.11a: -72dBm@54Mbps -90dBm@6Mbps802.11n: -70dBm@MCS7 -88dBm@MCS0802.11ac: -60dBm@MCS9 -85dBm@MCS0Maximum Transmit Power<27dbmInterface(2)10/100 Base-T Ethernet portsPower SupplyDC 12V/1,5A (Not Included)802.3af PoE SupportedPower Consumption< 15WInstallationPole/Wall MountingExternal buttonsreset button (long press for 8 seconds to restore the factory default configuration)Dimensions315mm*145mm*80mmEnvironmentOperating Temperature:-40°C ～ 55°CStorage Temperature:-40°C ～ 70°C;Operating Humidity: 5% ～ 95% (non-condensing)Storage Humidity: 5% ～ 95% (non-condensing)Software FeaturesOperating ModeFit AP, Fat AP, Repeater, WISP modeWireless FunctionUp to 16 SSIDsSupport SSID hiding, Enable/Disable Wireless RadioRF Parameter settingRoamingSupport Layer 2 roaming Wireless SecurityCaptive Portal Authentication Static blacklist and whitelist Wireless Isolation Between Clients SSID to VLAN Mapping Support 802.1X WPA/WPA2/PSK/WPA/WPA2-EnterpriseRoutingSupport static IP, DHCP, PPPoE Dial UpManagementSupport local management with web Support remote management with Wi-Tek Cloud platformPlatform management featuresAutomatic RF adjustment via the platform Unified configuration via the platform Unified monitoring via the platform